The Infinity Classia™ C336 floorstanding speaker perfectly balances outstanding performance and beautiful design. Patented Infinity© Ceramic Metal Matrix Diaphragm (CMMD®) technology delivers improved accuracy – with dramatically reduced distortion – for incredibly lifelike sound. The C336 also features an improved tweeter that delivers extended high frequencies out to 40kHz; the tweeter is mounted in a patent-pending Constant Acoustic Impedance™ waveguide for improved sound anywhere in the listening room. Triple 6-1/2" woofers ensure outstanding bass response from a narrow, space-saving enclosure, helping make it the perfect speaker for today's high-definition music and video programs. The C336 is available in a cherry or high-gloss-black finish, complemented by a black cloth grille.

Frequency Response (±3dB): 40Hz – 30kHz; 35Hz – 40kHz (–6dB)
Recommended Power Amplifier Range: 10 Watts – 250 watts
Sensitivity (2.83V @ 1m): 91dB
Nominal Impedance: 8 Ohms
Crossover Frequency: 500Hz, 2800Hz; 24dB/octave
Low-Frequency Driver: Triple 6-1/2" (165mm) CMMD®
Midrange Driver: 4" (100mm) CMMD
High-Frequency Driver: 1" (25mm) CMMD
Dimensions (H x W x D): 48-1/2" x 8-1/2" x 10-1/2" (1232mm 216mm x 267mm)
Weight: 56.1 lb (25.4kg)

The type of enclosure housing the drivers. This describes the fundamental nature of how sound output and tuning are derived.

Not black and white

The nominal or normal impedance for the speaker at most frequencies

An additional magnet is provided internally which reduces the magnetic effects when in proximity to an old CRT-based display. This is a non-issue with flat panel displays or LCD/DLP rear projection sets.

Mid or mid-bass frequency driver size in inches

Mid or mid-bass driver type or material

Typically foam or rubber, the material that surrounds the cone. Rubber and similar materials will last longer and are more forgiving to environmental conditions.

Midrange driver size (typically given in inches)

The material which makes up the composition of the midrange driver

High frequency tweeter size in inches

Typically aluminum or silk dome, this describes the material used in the construction of the tweeter

Discrete connections for high and low drivers allowing them to be driven separately using two amplifier channels per speaker

The range of low to high frequency material that can be reproduced by this system

Maximum power (in watts) the system can either output or support

How loud the speaker would be at 1 meter if fed a 1kHz signal at 1 watt (2.83 volts)

There are currently no reviews for this product. Be the first to review by clicking below!

Review this product...